Double flap lift-up fitting, E-Senso, for two-piece flaps with division 1:1

For wooden flaps or flaps with aluminium frame

The product is not / no more available

Manuals and Videos
  • CAD data available.
    Please select an article to view.
  • Specifications available.
    Please select an Item.
  • Technical documents available.
    Please select an article.
  • Catalog links available.
    Please select an article to view.

Solutions for this product

Filter

Complete your selection

Help

Help

Requested amount is in stock.
Limited stock available.
Item no longer available.

Note:
To receive items as fast as possible, choose 'When available' at checkout.

Double flap lift-up fitting, E-Senso, for two-piece flaps with division 1:1

For wooden flaps or flaps with aluminium frame

  • see key

    For dimensions and angles see table “installation dimensions”

  • see key

    For dimensions and angles see table “installation dimensions”

  • see key

    For dimensions see table “installation dimensions”

  • see key

    For dimensions and angles see table “installation dimensions”

  • Push button sender for recess mounting in 35 mm drill hole, range approx. 5–10 m

Note: The image may show a similar article

Product details

Electro-mechanical opening and closing system
Quiet drive with soft opening and soft closing mechanism
Controlled using individually positionable push-button sender
With free-swing function for effortless manual flap operation in the event of a power failure
Automatic safety stop at both sides in the event of obstacles

  • Electro-mechanical opening and closing system
    Quiet drive with soft opening and soft closing mechanism
    Controlled using individually positioned push-button sender
    With free swing function for easy manual flap operation in the event of a power failure
    Obstacle detection with auto-stop at both sides

Flap fitting type

Double flap lift-up fitting

Area of application

For 2-piece flaps with 1:1 division

Lid material

Wood, Aluminium frame

Material

Fitting: Plastic, aluminium
cover cap: Plastic

Adjustment facility

Height/side of front panel (depending on selected concealed hinges)
Holding power/opening angle/centre pull (via fitting)

For lid height

Input voltage

100 – 240 V, 50 – 60 Hz

Mains frequency

50 – 60 Hz

Nominal voltage

18 V

Order reference

Connecting hinges and battery for push-button sender must be ordered separately. Screw-on brackets for narrow aluminium frames available as accessories. Use standard concealed hinges with opening angle 110° for fixing the top flap part to cabinet. We recommend to use the stronger model when in doubt.

Supplied with

2 Fittings with cover caps (left/right)
1 Control unit with female adapter
1 Connecting cable (length 2,000 mm) with angled Euro plug/male adapter
1 Push-button sender (without battery)
2 Screw-on brackets for wooden flaps or flaps with wide aluminium frame
1 Set of installation and operating instructions

Technical data attributes
Configuration required
Configuration required
Additional information attributes

These fittings are operated using a push-button sender at a frequency of 869 MHz. The operating permit for this frequency has been issued for EU countries. Permission for use in other countries must be verified. The fittings must be designed for 915 MHz for North America. The relevant catalogue numbers can be provided if necessary.

Complementary products and accessories
Compare selection
ppic-04183518.jpg
Connecting hinge, for Häfele Free fold short
View 2 Articles
Corporate Office: Häfele America Co., 3901 Cheyenne Drive, Archdale, N.C. 27263
Phone: 800.423.3531, Fax: 800.325.6197, Local Phone: 336.434.2322, Email: info@haefeleamericas.com
28.11.2022